This PR adds a configurable max-width to the agent panel. This will be
particularly useful when opting into an agentic-first layout where the
thread will be at the center of the UI (with the panel most likely
full-screen'ed, which is why I'm also adding here the button to make it
full screen in the toolbar). The default max-width is 850, which is a
bit bigger than the one generally considered as a standard (~66
characters wide, which usually sums up to 750 pixels).
Release Notes:
- Agent: Added a max-width to the thread view for better readability,
particularly when the panel is zoomed in.
Closes#48007
Release Notes:
- Added editor setting for changing regex mode default in vim searches
Summary:
- Based on the report in #48007 and the discussion here
https://github.com/zed-industries/zed/pull/48127#issuecomment-3838678903
- There was feedback mentioning that vim-mode needs to default
vim-searches to use regex-mode (even when the editor regex-search
setting is disabled). However, it was suggested that a vim search
setting could be configured to adjust this behaviour.
- In this PR a new vim setting was added to change whether vim-searches
will use regex-mode by default, so now users can can configure
vim-search to not use regex-mode when typing the `/` character (or using
the vim search command).
Screen Captures:
https://github.com/user-attachments/assets/172669fb-ab78-41a1-9485-c973825543c5
Follow up to https://github.com/zed-industries/zed/pull/49807
Previously, when there were multiple conflicts across the codebase, we
would pop a toast at the bottom right corner of the UI. A toast seemed
like a functional idea because it'd be visible from any state of the app
and thus it'd be a good place to expose the button that allows you to
quickly prompt the agent to resolve all conflicts, as opposed to
creating a thread for each individual one. However, the toast was met
with some negative (and correct) feedback, mostly because it is
interruptive, and thus can sometimes block very relevant surfaces, like
either the agent panel itself or the Git commit area.
Therefore, in this PR, I'm removing the toast and adding a button in the
status bar instead; a bit more minimal, not interruptive, and a common
place for other items that might require your attention. The status bar
can be quite busy these days, though; we can display diagnostics, LSP
status, and file names in there; conscious of that. But it felt like it
could work given this button is such a transient one that you can either
easily manually dismiss or wait for it to be auto-dismissed as you or
the agent resolves the merge conflicts.
<img width="500" height="864" alt="Screenshot 2026-04-02 at 9 15@2x"
src="https://github.com/user-attachments/assets/4412a05c-77d0-4391-8ea1-25d1749b5e20"
/>
Release Notes:
- Git: Improved how we surface the affordance to resolve codebase-wide
merge conflicts with the agent in the UI.
- Agent: Added a setting to control whether or not the button to resolve
merge conflicts with the agent should be displayed.
Implements basic focus-follows-mouse behavior.
Right now, it's only applied in the `workspace` crate for `Pane`s, so
anything that lives outside of that container (panels and such for the
most part) won't have this behavior applied. The core logic is
implemented as an extension trait, and should be trivial to apply to
other elements as it makes sense.
https://github.com/user-attachments/assets/d338fa30-7f9c-439f-8b50-1720e3f509b1Closes#8167
Release Notes:
- Added "Focus Follows Mouse" for editor and terminal panes
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
## Context
This PR introduces a `base` field for settings profiles to allow
profiles to either overlay `user` settings or to overlay `default`,
which is simply zed's defaults (user settings are skipped). I'm not
entirely sure I love `default` because it's a bit confusing (there's a
setting called `default` but the default is `user`). Another idea I had
was `factory` (`user` (default) or `factory`) - curious to hear from the
reviewers. This will be useful for those of us who need to quickly flip
to a default state, or a default state with some customizations on top.
Additionally, from what I can tell, VS Code's profile system is more in
line with what this PR is offering in Zed - profiles overlay the default
settings, not the user's customization layer. So this will be familiar
for those users.
I've had no issue with the migrator, code is pretty simple there, but
would love for @smitbarmase to review the migration to make sure I'm not
missing something.
## Self-Review Checklist
<!-- Check before requesting review: -->
- [X] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [X] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- Improved the flexibility of settings profiles by offering a way for
profiles to lay atop of zed defaults, skipping user settings all
together. Settings Profiles now take the following form.
```json5
"Your Profile": {
"base": "user" // or "default"
"settings": {
// ...
},
},
```
This PR changes `agent.play_sound_when_agent_done` from a boolean to an
enum with three options:
- `never` (default)
- `when_hidden`
- `always`
In Settings → Agent, this now appears as a _Play Sound When Agent Done_
dropdown.
Existing settings are migrated automatically:
- `false` → `never`
- `true` → `always`
### Why
A boolean only allowed the sound to be on or off. This change gives
users clearer control over when the agent notification sound should
play.
### Verification
- Added a migrator test for this setting change.
- Manually tested the settings UI, settings migration and the feature
Release Notes:
- Added new agent notification sound options
---------
Co-authored-by: Oleksiy Syvokon <oleksiy.syvokon@gmail.com>
Follow-up to https://github.com/zed-industries/zed/pull/52608
This PR adds a new iteration to the thinking block display design after
some internal round of feedback. It turns out, we had some people
appreciating the auto-collapse when thinking is done; thinking content
isn't too useful afterwards and it is just more content _to to he
model_, not the user. I also liked the one old but it definitely has the
issue of being a jarring layout shift when it wraps up. So that's why
I'm keeping what I introduced in the PR linked above as a setting, so
that anyone who feels strongly about the default (auto-expand, and
auto-collapse) can change that.
Release Notes:
- N/A
🫡
Self-Review Checklist:
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- Removed legacy Text Threads feature to help streamline the new agentic
workflows in Zed. Thanks to all of you who were enthusiastic Text Thread
users over the years ❤️!
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Release Notes:
- The git diff diff view now automatically switches from split mode to
unified mode when the pane is narrower than a configurable minimum
column count. You can configure this via the new
`minimum_split_diff_width` setting.
Self-Review Checklist:
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Closes #ISSUE
Release Notes:
- N/A
The Emmet extension is enabled for Elixir files (`.ex`) because of the
`~H` sigil, but this is a bit unexpected if you work exclusively with
HEEx files (`.heex`) or you don't actually use Phoenix in any capacity
With this change, the user must explicitly opt into Emmet for Elixir
files, just like Tailwind
Release Notes:
- N/A
This PR adds the ability to change both the terminal and agent panels
between fixed and flexible sizing using the status bar button right
click menu. The value persists in your settings, similar to the dock
position.
I've also slightly tweaked the styling of the "Dock Left" and "Dock
Right" items in the right-click menu, adding the current value as an
item with a check beside it, to make it clear that it's a selectable
option.
Release Notes:
- N/A
Follow up to https://github.com/zed-industries/zed/pull/51525
Closes https://github.com/zed-industries/zed/issues/52452
This PR further refines the behavior of thinking blocks in the agent
panel. In the PR linked above, I had previously made it auto-expand
while running but then auto-collapse when finished. Although that
reduced the sense of staleness when the model is thinking for too long,
it caused layout shift that many found jarring.
Therefore, this PR changes the behavior so that, by default, thinking
blocks render "almost" fully expanded. They will have a max-height and
will auto-scroll as content streams in. Therefore, this design fully
removes layout shift and still allows you to sort of follow along the
generated thinking content, even though sometimes it can be fast, in
which case you can always fully expand it. Lastly, I'm also adding a
"thinking display" setting that allows to choose between the "automatic"
behavior (what I just described, the default), always expanded, or
always collapsed.
Here's a preview:
https://github.com/user-attachments/assets/c96c89c7-40ed-4e9b-9ffc-f70b0659be47
Release Notes:
- Agent: Refined thinking block display, removing layout shift while
still allowing it to be readable while it streams in. It comes together
with a "Thinking Display" setting to control the behavior
Context: if the toolbar and tab bar are both disabled, the current
filename is not visible. This adds it to the bottom bar, similar to vim.
Behind a setting, disabled by default
Release Notes:
- N/A or Added/Fixed/Improved ...
## Context
This adds a setting for controlling the sidebar side
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- N/A
---------
Co-authored-by: Eric <eric@zed.dev>
Closes#52115
## Context
Removes the third party edit prediction integration for Sweep AI ahead
of their servers shutting down.
This PR will not affect those who are already use or plan to use their
open weighted models. The code removed by this PR was required for
integrating with their proprietary API.
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- Removed support for using the Sweep AI edit prediction provider
through their proprietary API, as the servers are shutting down
https://discord.com/channels/1100625416022138902/1100625417272045639/1480644297903575142,
https://x.com/wwzeng1/status/2033302698360180949
- zed-extensions/elixir#61 renames `HEEX` to `HEEx`; to prevent any
disruptions from that change, this adds the correct name alongside a
settings migration
- zed-extensions/elixir#101 adds support for `EEx` templates; this sets
the default language server to be the same as that of `Elixir` and
`HEEx`
This also adds a few more extensions that should be recognized as `HEEx`
files
Release Notes:
- N/A
---------
Co-authored-by: Finn Evers <finn@zed.dev>
This PR adds Git status badges next to file names in the Project Panel,
following my older PR #49802
These are enabled by having "git_status" true.
Screenshot
<img width="343" height="320" alt="image"
src="https://github.com/user-attachments/assets/b2c208bf-5027-4947-a5ee-eeb74fadb02b"
/>
I'd love to hear feedback about any of this :)
Especially feedback on these:
- File name colour is determined only by Git status, the diagnostic
badges remain separate. Should diagnostics also affect the filename
colour?
- (Unstaged) Modified files and staged modifications share the same
colour, in vscode staged modifications use a brownish colour by default
which I could not find the colours. I think differentiating them is
definetely something to add.
Release Notes
- Added git status indicators in Project Panel. It can be enabled by
setting `git_status_indicator` to `true` in `project_panel` settings.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Many editors such as vim and emacs support "modelines", a comment at the
beginning of the file that allows the file type to be explicitly
specified along with per-file specific settings
- The amount of configurations, style and settings mapping cannot be
handled in one go, so this opens up a lot of potential improvements.
- I left out the possiblity to have "zed" specific modelines for now,
but this could be potentially interesting.
- Mapping the mode or filetype to zed language names isn't obvious
either. We may want to make it configurable.
This is my first contribution to zed, be kind. I struggled a bit to find
the right place to add those settings. I use a similar approach as done
with editorconfig (merge_with_editorconfig). There might be better ways.
Closes#4762
Release Notes:
- Add basic emacs/vim modeline support.
Supersedes #41899, changes:
- limit reading to the first and last 1kb
- add documentation
- more variables handled
- add Arc around ModelineSettings to avoid extra cloning
- changed the way mode -> language mapping is done, thanks to
`modeline_aliases` language config
- drop vim ex: support
- made "Local Variables:" handling a separate commit, so we can drop it
easily
- various code style improvements
---------
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
We've decided to remove rodio backend for audio as we didn't have time
to get it to a nice spot. I personally believe we should eventually
re-land it (the composable pipelines are quite nice!), but given that we
need audio to work, this seems like the best way forward. We won't have
to worry about all the ways in which the legacy pipeline interoped with
rodio's.
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- audio: Experimental rodio audio backend has been removed.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Yara <git@yara.blue>
Currently, Zed always places three fixed window buttons (Minimize,
Maximize and Close) on the right side of the window in a fixed order
ignoring any user configuration or desktop environment preference (like
elementary).
This PR adds support for GNOME-style layout strings (`minimize:close`).
By default, we pull it from the gsettings portal, but we also allow
manual configuration via `title_bar.button_layout` config key.
<img width="1538" height="797" alt="image"
src="https://github.com/user-attachments/assets/5db6bfa2-3052-4640-9228-95c37f318929"
/>
Closes#46512
I know it's a relatively large PR for my first one and I'm new to Rust.
So, sorry if I've made any huge mistakes. I had just made it for
personal use and then decided to try to clean it up and submit it.
I've tested with different configs on Linux. Untested on other
platforms, but should have no impact.
If it's not up to par, it's okay, feel free to close :)
Release Notes:
- Added support for GNOME's window buttons configuration on Linux.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Per Opencode's website:
> Zen gives you access to a curated set of AI models that OpenCode has
tested and benchmarked specifically for coding agents. No need to worry
about inconsistent performance and quality, use validated models that
work.
> - [x] Testing select models and consulting their teams
> - [x] Working with providers to ensure they're delivered properly
> - [x] Benchmarking all model-provider combinations we recommend
There are so many models available, but only a few work well with coding
agents. Most providers configure them differently with varying results.
The models under the Zen umbrella typically have a more reliable
token(s) per second speed with minimal outages. The opencode ecosystem
has improved my workflow if not many others' !
Release Notes:
- Added [Opencode Zen](https://opencode.ai/zen) to list of providers
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
## Context
Adds a tool to utilize the UI we already expose to ACP agents. Behind a
feature flag for now.
## How to Review
Mostly a tool to hook up to all of the plan plumbing we already have in
acp thread.
## Self-Review Checklist
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- N/A
Fixes#51542
Adds a `git_panel.starts_open` setting for parity with `project_panel`.
When set to `true`, the git panel opens automatically in new workspaces
that don't have saved panel state.
The default is `false`, matching current behavior (non-breaking).
### Usage
```json
{
"git_panel": {
"starts_open": true
}
}
```
### Implementation
Follows the same pattern as `project_panel.starts_open`:
1. `GitPanelSettingsContent` - added `starts_open: Option<bool>` to the
settings schema
2. `GitPanelSettings` - added `starts_open: bool` field
3. `GitPanel` Panel impl - overrides `starts_open()` to read from
settings
Release Notes:
- Added `git_panel.starts_open` setting to control whether the git panel
opens automatically in new workspaces (default: false)
---------
Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
## Summary
- Implements `icon_label` on `GitPanel` to return the total count of
uncommitted changes (`new_count + changes_count`) when non-zero, capped
at `"99+"` for large repos.
- Updates `PanelButtons::render()` to render that label as a small green
badge overlaid on the panel's sidebar icon, using absolute positioning
within a `div().relative()` wrapper.
- The badge uses `version_control_added` theme color and
`LabelSize::XSmall` text with `LineHeightStyle::UiLabel` for accurate
vertical centering, positioned at the top-right corner of the icon
button.
The `icon_label` method already existed on the `Panel`/`PanelHandle`
traits with a default `None` impl, and was already implemented by
`NotificationPanel` (unread notification count) and `TerminalPanel`
(open terminal count) — but was never rendered. This wires it up for all
three panels at once.
## Notes
- Badge is positioned with non-negative offsets (`top(0)`, `right(0)`)
to stay within the parent container's bounds. The status bar's
`render_left_tools()` uses `.overflow_x_hidden()`, which in GPUI clips
both axes (the `overflow_mask` returns a full content mask whenever any
axis is non-`Visible`), so negative offsets would be clipped.
- `LineHeightStyle::UiLabel` collapses line height to `relative(1.)` so
flex centering aligns the visual glyph rather than a
taller-than-necessary line box.
- No new data tracking logic — `GitPanel` already maintains `new_count`
and `changes_count` reactively.
- No feature flag or settings added per YAGNI.
## Suggested .rules additions
The following pattern came up repeatedly and would prevent future
sessions from hitting the same issue:
```
## GPUI overflow clipping
`overflow_x_hidden()` (and any single-axis overflow setter) clips **both** axes in GPUI.
The `overflow_mask()` implementation in `style.rs` returns a full `ContentMask` (bounding box)
whenever any axis is non-`Visible`. Absolute-positioned children that extend outside the element
bounds will be clipped even if only the X axis is set to Hidden.
Avoid negative `top`/`right`/`bottom`/`left` offsets on absolute children of containers
that have any overflow hidden — keep badge/overlay elements within the parent's bounds instead.
```
Release Notes:
- Added a numeric badge to the git panel sidebar icon showing the count
of uncommitted changes.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes https://github.com/zed-industries/zed/discussions/49740
Adds optional file and folder icons to the Git panel so its file list is
easier to scan, especially in larger repositories.
- add folder icons for Git panel entries
- add Git panel settings for file and folder icon visibility
---
Release Notes:
- Made the Git Panel aware of icon themes.
- Added the ability to render file type icons in the Git panel.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Follow up to https://github.com/zed-industries/zed/pull/51384
This PR fixes the settings UI rendering of this setting by adding a
default value and also wraps it in the feature flag (only the settings
UI rendering), given it's not widely available just yet.
Release Notes:
- N/A
This PR introduces the `project_panel.scrollbar.horizontal_scroll`
setting to allow users to toggle the horizontal scroll bar in the
project panel. This was Zed's design before PR #18513, and the default
behavior of VSCode (`workbench.list.horizontalScrolling`).
https://github.com/user-attachments/assets/f633f4e4-a585-4494-8f48-df77c6aca418
## Rationale
Zed's design used to be the same as the default behavior of VSCode.
I.e., no horizontal scrolling, and the view is always snapped to the
left, with long file names clipped of. If you want to see the content
that is out-of-frame, you'll need to drag the handle and expand the
project panel. This could be problematic, especially for large repos
with multiple levels of nested directories, as pointed out by issues
#5550 and #7001.
<img width="1398" height="992" alt="image"
src="https://github.com/user-attachments/assets/d86563f2-0f06-4e9e-818c-155ac45f0f56"
/>\
*VSCode's default setup, for reference.*
Then came PR #18513, which added horizontal scroll and addressed this
pain point, but users didn't have a choice. They're stuck with
horizontal scrolling always turned on. I, for instance, personally
prefer the old, VSCode-default behavior, for most projects I open are
small and don't need horizontal scrolling in the project panel. With
horizontal scrolling always turned on, I find it annoying to have my
project panel view accidentally scrolled to the middle, and I'll have to
grab my mouse and scroll it back. It's also visually redundant.
Thus, why not add an option like VSCode's
`workbench.list.horizontalScrolling` and let users choose? I'd love to
be able to, say, set a per-project override for the projects that need
horizontal scrolling, while having it disabled by default.
## Extra Notes
- I was originally thinking about using `ScrollbarAxes` from
`src/editor_settings.rs` and make the option
`project_panel.scrollbar.axes.horizontal` similar to the global editor
scrollbar settings, but this option is specific to the project panel and
it doesn't quite make sense to allow disabling vertical scrolling on the
project panel, so I added a standalone option for it instead, similar to
VSCode's `workbench.list.horizontalScrolling`.
- I went the conservative route and set horizontal scrolling to enabled
(current behavior) by default. Imo it might make more sense to disable
it by default instead, similar to VSCode, but I'll leave this for the
Zed team to decide.
- I named it `horizontal_scroll` instead of `horizontal_scrolling` to be
consistent with the adjacent setting `sticky_scroll`.
- As for tests, I don't see tests for the scrollbar, so I didn't add
any.
I'd be glad to update the PR if anything is not inline with the
project's requirements or conventions.
---
Release Notes:
- Added `project_panel.scrollbar.horizontal_scroll` setting to allow
toggling horizontal scrolling in the project panel
Signed-off-by: k4yt3x <i@k4yt3x.com>
Closes #ISSUE
Before you mark this PR as ready for review, make sure that you have:
- [ ] Added a solid test coverage and/or screenshots from doing manual
testing
- [X] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- Enabled `diff_stats` in the git panel by default.
Closes#47550
Changes the `auto_indent` setting from a boolean to an enum with three
modes:
- **`full`** (default): Adjusts indentation based on syntax context when
typing (previous `true` behavior)
- **`preserve_indent`**: Preserves the current line's indentation on new
lines, but doesn't adjust based on syntax
- **`none`**: No automatic indentation - new lines start at column 0
(previous `false` behavior)
This gives users more control over indentation behavior. Previously,
setting `auto_indent: false` would still preserve indentation on new
lines, which was unexpected.
Includes:
- Settings migration from boolean to enum values
- Settings UI dropdown renderer
Release Notes:
- Changed `auto_indent` setting from boolean to enum with `full`,
`preserve_indent`, and `none` options
<img width="1373" height="802" alt="Screenshot 2026-01-27 at 16 32 10"
src="https://github.com/user-attachments/assets/b629e1d8-7359-4853-8222-abfa71d6ebe2"
/>
---------
Co-authored-by: MrSubidubi <finn@zed.dev>
The path hyperlink regex's middle-char pattern
[[:(][^0-9()]](cci:2://file:///d:/zed/crates/fs/src/fs.rs:89:0-157:1)
allowed colon+space because space was not in the exclusion set. This
caused `0: foo/bar.txt` to be matched as a single path instead of just
`foo/bar.txt`.
Fix: add space to the exclusion class: [[:(][^0-9()\\
]](cci:2://file:///d:/zed/crates/fs/src/fs.rs:89:0-157:1)
Closes#50531
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
(N/A)
Release Notes:
- Fixed terminal Ctrl-click path detection failing when path is preceded
by a prefix like `0:` (#50531)
## Summary
- add a new `ai_gateway` language model provider in zed using the
openai-compatible chat completions path
- register ai gateway in provider wiring, settings schema, and default
settings
- add vercel ai gateway icon and provider list entry
- parse ai gateway model capabilities from tags (`tool-use`, `vision`)
and supported parameters
- clean up ai gateway oidc auth failures into a concise actionable error
message
Release Notes:
- Added Vercel AI Gateway as a new LLM provider in Zed.
This PR adds the small UI change of `git diff --numstat` to the git
panel so you can see the number of additions/deletions per file. There
is an option in the settings UI for this under `git_panel`.`diff_stats`.
This option is set to `false` by default.
<!-- initial version <img width="1648" height="977" alt="Screenshot
2026-02-18 at 18 42 47"
src="https://github.com/user-attachments/assets/b8b7f07c-9c73-4d06-9734-8f1cf30ce296"
/> -->
<img width="1648" height="977" alt="Screenshot 2026-02-18 at 21 25 02"
src="https://github.com/user-attachments/assets/73257854-6168-4d12-84f8-27c9e0abe89f"
/>
Release Notes:
- Added git diff stats to git panel entries
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Anthony Eid <anthony@zed.dev>
Discussed in #6668 specifically this comment from @zackangelo:
> The biggest thing keeping me from using Zed as a daily driver is error
indication in the project panel. When I'm making big project-wide
changes I can't clearly see which files have errors (in editors like
VSCode the filenames turn red).
> VSCode seems to use a letter on the right gutter to indicate git
status and a number next to it to indicate diagnostic status. The color
indicates either.
This PR implements that, I added an opt-in `diagnostic_badges` setting
(default is false) that shows error and warning counts as colored labels
on the right side of each project panel entry. Counts bubble up to
parent directories.
When `diagnostic_badges` is enabled, diagnostic severity takes priority
over git status for entry text color.
Since warnings and git-modified share the same yellow, git status with
this option on is readable through the file icon decoration and the
absence of a number badge on the right.
Example:
<img width="522" height="785" alt="image"
src="https://github.com/user-attachments/assets/2da62580-86fe-480b-9b57-ff137ea42285"
/>
<img width="884" height="580" alt="image"
src="https://github.com/user-attachments/assets/198e9a45-dacd-4f1e-a66c-f2b84fd4db63"
/>
Release Notes:
- Added diagnostic count badges to the project panel, displaying error
and warning counts next to file names. You can modify this setting using
the `diagnostic_badges` option, which is enabled by default.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
After looking around a bit, I felt like subagent wasn't the right way to
introduce this tool to the model. And with some back and forth
verification + market research, we both agreed spawn_agent was a better
name for what this tool is doing.
It still calls the right tool if you ask for a subagent, but especially
if we move these to be running in the background, spawn will be a better
name anyway.
Release Notes:
- N/A
Release Notes:
- Added the ability to use a self-hosted OpenAI-compatible server for
edit predictions.
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
This reverts commit 1d66bbe06f.
Needs 2 more fixes:
* enter does not move to the first excerpt anymore
* there could be situations when a narrowed search does not decrease the
excerpt enough to see the result onscreen
Release Notes:
- N/A
Add `agent_worktree_directory` to `GitSettings` for configuring where
agent worktrees are stored (default: Zed data dir). Remove `Copy` derive
from `GitSettings`/`GitContentSettings` (incompatible with String field)
and fix downstream `.as_ref().unwrap()` call sites.
Define `AgentGitWorktreeInfo` (branch, worktree_path, base_ref) and add
it to `DbThread` + `DbThreadMetadata` for persistence and session list
display.
Closes AI-33
Release Notes:
- N/A
Add Kanayago as an available Ruby language server in default settings.
Disabled by default (prefixed with `!`), users can opt-in via their
settings.
This corresponds to the extension-side support added in
zed-extensions/ruby#224.
Release Notes:
- ruby: Added Kanayago as an available language server.
Reverts the whole "project search on type" set of PRs until we figure
out better ways to deal with flickering between search results
appearing.
Release Notes:
- N/A
Closes#46795
This PR aims to correctly detect the hyperlinks in cases like the
following, where box-drawing characters immediately precede the path
(without spaces in between).
```
╭─[Cargo.toml:55:1]
...
╰────
```
The only false negative with the fix in this PR would be that a file
path really contains leading box drawing characters which I think is
very unlikely.
---
Release Notes:
- Fixed an issue where the hyperlinks would not be properly detected in
the terminal if they were preceded by box-drawing characters (like ─, │,
┌, ┐)
Signed-off-by: Charlie-XIAO <yx2436@nyu.edu>
Closes#45135
Since neither the project search nor file finder search was showing
project's root name, including it in the history was unnecessary,
especially when the user had `project_panel.hide_root` set to `true`.
Release Notes:
- Made file finder to respect `project_panel.hide_root` settings
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
