Co-Authored-By: Ben K <ben@zed.dev>
Co-Authored-By: Anthony <anthony@zed.dev>
Co-Authored-By: Mikayla <mikayla@zed.dev>
Release Notes:
- settings: Major internal changes to settings. The primary user-facing
effect is that some settings which did not make sense in project
settings files are no-longer read from there. (For example the inline
blame settings)
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Anthony <anthony@zed.dev>
serde 1.0.221 introduced serde_core into the build graph, which should
render explicitly depending on serde_derive for faster build times an
obsolote method.
Besides, I'm not even sure if that worked for us. My hunch is that at
least one of our deps would have `serde` with derive feature enabled..
and then, most of the crates using `serde_derive` explicitly were also
depending on gpui, which depended on `serde`.. thus, we wouldn't have
gained anything from explicit dep on `serde_derive`
Release Notes:
- N/A
Closes#37829
This PR introduces and exposes `REPLSettings` to control the number of
lines and columns in the REPL. These settings are integrated into the
existing configuration system, allowing for customization and management
through the standard settings interface.
#### Changes
- Added `REPLSettings` struct with `max_number_of_lines` and
`max_number_of_columns` fields.
- Integrated `REPLSettings` with the settings system by implementing the
`Settings` trait.
- Ensured compatibility with the workspace and existing settings
infrastructure.
Release Notes:
- Add configuration "repl" to settings to configure max lines and
columns for repl.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Follows on from
https://github.com/zed-industries/zed/pull/37716#pullrequestreview-3195695110
by @SomeoneToIgnore
After this the doctests will be run in CI to check that the examples are
still accurate.
Note that doctests aren't run by Nextest: you can run them locally with
`cargo test --doc`.
Summary:
* Run tests from CI
* Loosen an exact float comparison to match approximately (otherwise it
fails)
* Fixed one actual bug in the tests for `dilate` where the test code
assumed that `dilate` mutates `self` rather than returning a new object
* Add some `must_use` on some functions that seemed at risk of similar
bugs, following the Rust stdlib style to add it where ignoring the
result is almost certainly a bug.
* Fix some cases where the doc examples seem to have gone out of date
with the code
* Add imports to doctests that need them
* Add some dev-dependencies to make the tests build
* Fix the `key_dispatch` module docstring, which was accidentally
attached to objects within that module
* Skip some doctest examples that seem like they need an async
environment or that just looked hard to get running
AI usage: I asked Claude to do some of the repetitive tests. I checked
the output and fixed up some things that seemed to not be in the right
spirit of the test, or too longwinded.
I think we could reasonably run the tests on only Linux to save CI
CPU-seconds and latency, but I haven't done that yet, partly because of
how it's implemented in the action.
Release Notes:
- N/A
- **toolchains: Add new state to toolchain selector**
- **Use toolchain term for Add Toolchain button**
- **Hoist out a meta function for toolchain listers**
Closes#27332
Release Notes:
- python: Users can now specify a custom path to their virtual
environment from within the picker.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
This PR separates out the associated constant `KEY` from the `Settings`
trait into a new trait `SettingsKey`. This allows for the key trait to
be derived using attributes to specify the path so that the new
`SettingsUi` derive macro can use the same attributes to determine top
level settings paths thereby removing the need to duplicate the path in
both `Settings::KEY` and `#[settings_ui(path = "...")]`
Co-authored-by: Ben Kunkle <ben@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
This PR fixes an issue where extension operations would never show in
the activity indicator despite this being implemented for ages. This
happened because we were always returning `None` whenever the app has a
global auto updater, which is always the case, so the code path for
showing extension updates in the indicator could never be hit despite
existing prior. Also slightly improves the messages shown for ongoing
extension operations, as these were previously context unaware.
While I was at this, I also quickly took a stab at cleaning up some
remotely related stuff, namely:
- The `AnimationExt` trait is now by default only implemented for
anything that also implements `IntoElement`. This prevents
`with_animation` from showing up for e.g. `u32` within the suggestions
(finally).
- Commonly used animations are now implemented in the
`CommonAnimationExt` trait within the `ui` crate so the needed code does
not always need to be copied and element IDs for the animations are
truly unique.
Relevant change here regarding the original issue is the change from the
`return match` to just a `match` within the activitiy indicator, which
solved the issue at hand.
If we find this to be too noisy at some point, we can easily revisit,
but I think this holds important enough information to be shown in the
activity indicator, especially whilst developing extensions.
Release Notes:
- Extension installation and updates will now be shown in the activity
indicator.
Closes #ISSUE
Initially, the `SettingsUi` trait was tied to `Settings`, however, given
that the `Settings::FileContent` type (which may be the same as the type
that implements `Settings`) will be the type that more directly maps to
the JSON structure (and therefore have the documentation, correct field
names (or `serde` rename attributes), etc) it makes more sense to have
the deriving of `SettingsUi` occur on the `FileContent` type rather than
the `Settings` type.
In order for this to work a relatively important change had to be made
to the derive macro, that being that it now "unwraps" options into their
inner type, so a field with type `Option<Foo>` where `Foo: SettingsUi`
will treat the field as if it were just `Foo`, expecting there to be a
default set in `default.json`. This imposes some restrictions on what
`Settings::FileContent` can be as seen in 1e19398 where `FileContent`
itself can't be optional without manually implementing `SettingsUi`, as
well as introducing some risk that if the `FileContent` type has
`serde(default)`, the default value will override the default value from
`default.json` in the UI even though it may differ (but it should!).
A future PR should probably replace the other settings with `FileContent
= Option<T>` (all of which currently have `T == bool`) with wrapper
structs and have `KEY = None` so the further niceties
`derive(SettingsUi)` will provide such as path renaming, custom UI, auto
naming and doc comment extraction can be used.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
## Goal
This PR creates the initial settings ui structure with the primary goal
of making a settings UI that is
- Comprehensive: All settings are available through the UI
- Correct: Easy to understand the underlying JSON file from the UI
- Intuitive
- Easy to implement per setting so that UI is not a hindrance to future
settings changes
### Structure
The overall structure is settings layer -> data layer -> ui layer.
The settings layer is the pre-existing settings definitions, that
implement the `Settings` trait. The data layer is constructed from
settings primarily through the `SettingsUi` trait, and it's associated
derive macro. The data layer tracks the grouping of the settings, the
json path of the settings, and a data representation of how to render
the controls for the setting in the UI, that is either a marker value
for the component to use (avoiding a dependency on the `ui` crate) or a
custom render function.
Abstracting the data layer from the ui layer allows crates depending on
`settings` to implement their own UI without having to add additional UI
dependencies, thus avoiding circular dependencies. In cases where custom
UI is desired, and a creating a custom render function in the same crate
is infeasible due to circular dependencies, the current solution is to
implement a marker for the component in the `settings` crate, and then
handle the rendering of that component in `settings_ui`.
### Foundation
This PR creates a macro and a trait both called `SettingsUi`. The
`SettingsUi` trait is added as a new trait bound on the `Settings`
trait, this allows the type system to guarantee that all settings
implement UI functionality. The macro is used to derived the trait for
most types, and can be modified through attributes for unique cases as
well.
A derive-macro is used to generate the settings UI trait impl, allowing
it the UI generation to be generated from the static information in our
code base (`default.json`, Struct/Enum names, field names, `serde`
attributes, etc). This allows the UI to be auto-generated for the most
part, and ensures consistency across the UI.
#### Immediate Follow ups
- Add a new `SettingsPath` trait that will be a trait bound on
`SettingsUi` and `Settings`
- This trait will replace the `Settings::key` value to enable
`SettingsUi` to infer the json path of it's derived type
- Figure out how to render `Option<T> where T: SettingsUi` correctly
- Handle `serde` attributes in the `SettingsUi` proc macro to correctly
get json path from a type's field and identity
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
This PR improves the toggle button group to be more responsive across
different layouts. This is accomplished by ensuring each button takes up
the same amount of space in the parent containers layout.
Ideally, this should be done with grids instead of a flexbox container,
as this would be much better suited for this purpose. Yet, since we lack
support for this, we go with this route for now.
| Before | After |
| --- | --- |
| <img width="1608" height="1094" alt="Bildschirmfoto 2025-08-13 um 11
24 26"
src="https://github.com/user-attachments/assets/2a4b5a59-6483-4f79-8fcb-e26e22071795"
/> | <img width="1608" height="1094" alt="Bildschirmfoto 2025-08-13 um
11 29 36"
src="https://github.com/user-attachments/assets/e6402729-6a8f-4a44-b79e-a569406edfff"
/> |
Release Notes:
- N/A
Follow up to: https://github.com/zed-industries/zed/pull/35670,
simplifies the List state APIs so you no longer have to worry about
strong vs. weak pointers when rendering list items.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
This is really just a small beginning, as there are many other icons to
be revised and cleaned up. Our current set is a bit of a mess in terms
of dimension, spacing, stroke width, and terminology. I'm sure there are
more non-used icons I'm not covering here, too. We'll hopefully tackle
it all soon leading up to 1.0.
Closes https://github.com/zed-industries/zed/issues/35576
Release Notes:
- N/A
This PR aims to improve the minimap performace. This is primarily
achieved by disabling/removing stuff that is not shown in the minimal as
well as by assuring the display map is not updated during minimap
prepaint.
This should already be much better in parts, as the block map as well as
the fold map will be less frequently updated due to the minimap
prepainting (optimally, they should never be, but I think we're not
quite there yet).
For this, I had to remove block rendering support for the minimap, which
is not as bad as it sounds: Practically, we were currently not rendering
most blocks anyway, there were issues due to this (e.g. scrolling any
visible block offscreen in the main editor causes scroll jumps
currently) and in the long run, the minimap will most likely need its
own block map or a different approach anyway. The existing
implementation caused resizes to occur very frequently for practically
no benefit. Can pull this out into a separate PR if requested, most
likely makes the other changes here easier to discuss.
This is WIP as we are still hitting some code path here we definitely
should not be hitting. E.g. there seems to be a rerender roughly every
second if the window is unfocused but visible which does not happen when
the minimap is disabled.
While this primarily focuses on the minimap, it also touches a few other
small parts not related to the minimap where I noticed we were doing too
much stuff during prepaint. Happy for any feedback there aswell.
Putting this up here already so we have a place to discuss the changes
early if needed.
Release Notes:
- Improved performance with the minimap enabled.
- Fixed an issue where interacting with blocks in the editor would
sometimes not properly work with the minimap enabled.
Closes#18263
Improvements:
• **Batch text rendering** - Combine adjacent cells with identical
styling into single text runs to reduce draw calls
• **Throttle hyperlink searches** - Limit hyperlink detection to every
100ms or when mouse moves >5px to reduce CPU usage
• **Pre-allocate collections** - Use `Vec::with_capacity()` for cells,
runs, and regions to minimize reallocations
• **Optimize background regions** - Merge adjacent background rectangles
to reduce number of draw operations
• **Cache selection text** - Only compute terminal selection string when
selection exists
Release Notes:
- Improved terminal rendering performance.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#33253 in a way that doesn't regress #32175 - namely,
automatically adjusts the contrast between the foreground and background
text in the terminal such that it's above a certain threshold. The
threshold is configurable in settings, and can be set to 0 to turn off
this feature and use exactly the colors the theme specifies even if they
are illegible.
## One Light Theme Before
<img width="220" alt="Screenshot 2025-07-07 at 6 00 47 PM"
src="https://github.com/user-attachments/assets/096754a6-f79f-4fea-a86e-cb7b8ff45d60"
/>
(Last row is highlighted because otherwise the text is unreadable; the
foreground and background are the same color.)
## One Light Theme After
(This is with the new default contrast adjustment setting.)
<img width="215" alt="Screenshot 2025-07-07 at 6 22 02 PM"
src="https://github.com/user-attachments/assets/b082fefe-76f5-4231-b704-ff387983a3cb"
/>
This approach was inspired by @mitchellh's use of automatic contrast
adjustment in [Ghostty](https://ghostty.org/) - thanks, Mitchell! The
main difference is that we're using APCA's formula instead of WCAG for
[these
reasons](https://khan-tw.medium.com/wcag2-are-you-still-using-it-ui-contrast-visibility-standard-readability-contrast-f34eb73e89ee).
Release Notes:
- Added automatic dynamic contrast adjustment for terminal foreground
and background colors
Closes #ISSUE
Adds a new `documentation` method to actions, that is extracted from doc
comments when using the `actions!` or derive macros.
Additionally, this PR adds doc comments to as many action definitions in
Zed as possible.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
Closes #ISSUE
Release Notes:
- N/A
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
Previously, if editing a long previous user message in the thread, you'd
have a double scroll situation because the editor used in that case had
its max number of lines capped. To solve that, I made the `max_lines` in
the editor `AutoHeight` mode optional, allowing me to not pass any
arbitrary number to the previous user message editor, and ultimately,
solving the double scroll problem by not having any scroll at all.
Release Notes:
- agent: Fixed double scroll that happened when editing a long previous
user message.
@ConradIrwin adding you as a reviewer as I'm touching editor code
here... want to be careful. :)
* Adds `min_lines` to `EditorMode::AutoHeight` and use `min_lines: 4` in
agent message editor. This makes it so that clicks in the blank space
below the first line of the editor also focus it, instead of needing to
click the very first line.
* Removes the div wrapping the editor, as it was only there to set
`min_h_16()`. This also tightens up the min space given to the editor -
before it was not evenly dividing the number of lines.
* Further tightens up vertical spacing by using `gap_1` instead of
`gap_4` between editor and controls below
At 4 line min height (after on the left, before on the right):
At 5 lines, one more than min height (after on the left, before on the
right):
Release Notes:
- Agent: Fixed clicking to focus the message editor to also work for
clicks below the last line.
#31922 made embedded terminals automatically grow to fit the content. We
since found some issues with large output which this PR addresses by:
- Only shaping / laying out lines that are visible in the viewport
(based on `window.content_mask`)
- Falling back to embedded scrolling after 1K lines. The perf fix above
actually makes it possible to handle a lot of lines, but:
- Alacrity uses a `u16` for rows internally, so we needed a limit to
prevent overflow.
- Scrolling through thousands of lines to get to the other side of a
terminal tool call isn't great UX, so we might as well set the limit
low.
- We can consider raising the limit when we make card headers sticky.
Release Notes:
- Agent: Improve handling of large terminal output
This reverts commit 1e55e88c18.
Closes #ISSUE
Release Notes:
- Python toolchain selector now uses path to the closest pyproject.toml
as a basis for picking a toolchain. All files under the same
pyproject.toml (in filesystem hierarchy) will share a single virtual
environment. It is possible to have multiple Python virtual environments
selected for disjoint parts of the same project.
This method was added in #20649 to be an alternative of `occlude` which
allows scroll events. It seems a bit arbitrary to only stop left mouse
downs, so this seems like it's probably an improvement.
Release Notes:
- N/A
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
## Overview
This PR adds the minimap feature to the Zed editor, closely following
the [design from Visual Studio
Code](https://code.visualstudio.com/docs/getstarted/userinterface#_minimap).
When configured, a second instance of the editor will appear to the left
of the scrollbar. This instance is not interactive and it has a slimmed
down set of annotations, but it is otherwise just a zoomed-out version
of the main editor instance. A thumb shows the line boundaries of the
main viewport, as well as the progress through the document. Clicking on
a section of code in the minimap will jump the editor to that code.
Dragging the thumb will act like the scrollbar, moving sequentially
through the document.
## New settings
This adds a `minimap` section to the editor settings with the following
keys:
### `show`
When to show the minimap in the editor.
This setting can take three values:
1. Show the minimap if the editor's scrollbar is visible: `"auto"`
2. Always show the minimap: `"always"`
3. Never show the minimap: `"never"` (default)
### `thumb`
When to show the minimap thumb.
This setting can take two values:
1. Show the minimap thumb if the mouse is over the minimap: `"hover"`
2. Always show the minimap thumb: `"always"` (default)
### `width`
The width of the minimap in pixels.
Default: `100`
### `font_size`
The font size of the minimap in pixels.
Default: `2`
## Providing feedback
In order to keep the PR focused on development updates, please use the
discussion thread for feature suggestions and usability feedback: #26894
## Features left to add
- [x] fix scrolling performance
- [x] user settings for enable/disable, width, text size, etc.
- [x] show overview of visible lines in minimap
- [x] clicking on minimap should navigate to the corresponding section
of code
- ~[ ] more prominent highlighting in the minimap editor~
- ~[ ] override scrollbar auto setting to always when minimap is set to
always show~
Release Notes:
- Added minimap for high-level overview and quick navigation of editor
contents.
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Nathan here: I also tacked on a bunch of UI refinement.
Release Notes:
- Introduced the ability to follow the agent around as it reads and
edits files.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR fixes several possible memory leaks due to loading images in
markdown files and the image viewer, using the new image cache APIs
TODO:
- [x] Ensure this didn't break rendering in any of the affected
components.
Release Notes:
- Fixed several image related memory leaks
resolves#24655resolves#23945
I haven't yet added a default binding for the new command. #27797 added `:ls` and
`:buffers` which in my opinion should use the global searchable version
given that that matches the vim semantics of those commands better than
just showing the tabs in the local pane.
There's also a question of what to do when you select a tab from another
pane, should the focus jump to that pane or should that tab move to the
currently focused pane? For now I've implemented the former.
Release Notes:
- Added `tab_switcher::ToggleAll` to search open tabs from all panes and focus the selected one.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Things this doesn't currently handle:
- [x] ~testing~
- ~we really need an snapshot test that takes a vscode settings file
with all options that we support, and verifies the zed settings file you
get from importing it, both from an empty starting file or one with lots
of conflicts. that way we can open said vscode settings file in vscode
to ensure that those options all still exist in the future.~
- Discussed this, we don't think this will meaningfully protect us from
future failures, and we will just do this as a manual validation step
before merging this PR. Any imports that have meaningfully complex
translation steps should still be tested.
- [x] confirmation (right now it just clobbers your settings file
silently)
- it'd be really cool if we could show a diff multibuffer of your
current settings with the result of the vscode import and let you pick
"hunks" to keep, but that's probably too much effort for this feature,
especially given that we expect most of the people using it to have an
empty/barebones zed config when they run the import.
- [x] ~UI in the "welcome" page~
- we're planning on redoing our welcome/walkthrough experience anyways,
but in the meantime it'd be nice to conditionally show a button there if
we see a user level vscode config
- we'll add it to the UI when we land the new walkthrough experience,
for now it'll be accessible through the action
- [ ] project-specific settings
- handling translation of `.vscode/settings.json` or `.code-workspace`
settings to `.zed/settings.json` will come in a future PR, along with UI
to prompt the user for those actions when opening a project with local
vscode settings for the first time
- [ ] extension settings
- we probably want to do a best-effort pass of popular extensions like
vim and git lens
- it's also possible to look for installed/enabled extensions with `code
--list-extensions`, but we'd have to maintain some sort of mapping of
those to our settings and/or extensions
- [ ] LSP settings
- these are tricky without access to the json schemas for various
language server extensions. we could probably manage to do translations
for a couple popular languages and avoid solving it in the general case.
- [ ] platform specific settings (`[macos].blah`)
- this is blocked on #16392 which I'm hoping to address soon
- [ ] language specific settings (`[rust].foo`)
- totally doable, just haven't gotten to it yet
~We may want to put this behind some kind of flag and/or not land it
until some of the above issues are addressed, given that we expect
people to only run this importer once there's an incentive to get it
right the first time. Maybe we land it alongside a keymap importer so
you don't have to go through separate imports for those?~
We are gonna land this as-is, all these unchecked items at the bottom
will be addressed in followup PRs, so maybe don't run the importer for
now if you have a large and complex VsCode settings file you'd like to
import.
Release Notes:
- Added a VSCode settings importer, available via a
`zed::ImportVsCodeSettings` action
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
We're seeing panics caused by a buggy implementation of AsyncWrite
that is being passed to rustls:
https://github.com/rustls/rustls/issues/2316#issuecomment-2662838186
One hypothesis was that we're using (comparatively) non-standard async
tools for connecting over websockets; so this attempts to make us be
(comparitvely) more standard.
Release Notes:
- N/A
A "Near" block acts similarly to a "Below" block, but can (if it's
height is <= one line height) be shown on the end of the preceding line
instead of adding an entire blank line to the editor.
You can test it out by pasting this into `go_to_diagnostic_impl` and
then press `F8`
```
let buffer = self.buffer.read(cx).snapshot(cx);
let selection = self.selections.newest_anchor();
self.display_map.update(cx, |display_map, cx| {
display_map.insert_blocks(
[BlockProperties {
placement: BlockPlacement::Near(selection.start),
height: Some(1),
style: BlockStyle::Flex,
render: Arc::new(|_| {
div()
.w(px(100.))
.h(px(16.))
.bg(gpui::hsla(0., 0., 1., 0.5))
.into_any_element()
}),
priority: 0,
}],
cx,
)
});
return;
```
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This adds a "workspace-hack" crate, see
[mozilla's](https://hg.mozilla.org/mozilla-central/file/3a265fdc9f33e5946f0ca0a04af73acd7e6d1a39/build/workspace-hack/Cargo.toml#l7)
for a concise explanation of why this is useful. For us in practice this
means that if I were to run all the tests (`cargo nextest r
--workspace`) and then `cargo r`, all the deps from the previous cargo
command will be reused. Before this PR it would rebuild many deps due to
resolving different sets of features for them. For me this frequently
caused long rebuilds when things "should" already be cached.
To avoid manually maintaining our workspace-hack crate, we will use
[cargo hakari](https://docs.rs/cargo-hakari) to update the build files
when there's a necessary change. I've added a step to CI that checks
whether the workspace-hack crate is up to date, and instructs you to
re-run `script/update-workspace-hack` when it fails.
Finally, to make sure that people can still depend on crates in our
workspace without pulling in all the workspace deps, we use a `[patch]`
section following [hakari's
instructions](https://docs.rs/cargo-hakari/0.9.36/cargo_hakari/patch_directive/index.html)
One possible followup task would be making guppy use our
`rust-toolchain.toml` instead of having to duplicate that list in its
config, I opened an issue for that upstream: guppy-rs/guppy#481.
TODO:
- [x] Fix the extension test failure
- [x] Ensure the dev dependencies aren't being unified by Hakari into
the main dependencies
- [x] Ensure that the remote-server binary continues to not depend on
LibSSL
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Closes https://github.com/zed-industries/zed/issues/11626
Part of https://github.com/zed-industries/zed/issues/12853
`"restore_on_file_reopen": true` in workspace settings can now be used
to enable and disable editor data between file reopens in the same pane:
https://github.com/user-attachments/assets/8d938ee1-d854-42a8-bbc3-2a4e4d7d5933
The settings are generic and panes' data store can be extended for
further entities, beyond editors.
---------------
Impl details:
Currently, the project entry IDs seem to be stable across file reopens,
unlike BufferIds, so those were used.
Originally, the DB data was considered over in-memory one as editors
serialize their state anyway, but managing and exposing PaneIds out of
the DB is quite tedious and joining the DB data otherwise is not
possible.
Release Notes:
- Started to restore editor state on reopen
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Release Notes:
- Multibuffers now use less vertical space for excerpt boundaries.
Additionally the expand up/down arrows are hidden at the start and end
of the buffers
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Zed AI <claude-3.5-sonnet@zed.dev>
This PR cleans up some color & elevation misc.
### Don't allow deriving Color from Hsla
The point of the [ui::Color] enum is to encourage consistent color
usage, and the the Color::Custom case is really only meant for cases
where we have no other choice.
`impl From<Hsla> for Color` encourages blindly passing colors into
`Color::Custom` – with this in place we might as well remove the entire
`Color` enum.
The usages that were updated due to this removal were for colors that
already exist in the Color enum, making it even more clear that it
didn't make sense to have this.
### `ElevationIndex` -> `Elevation`
This name would make more sense if we had an `Elevation` in the first
place. The new name is more clear.
#### `Button::elevation`
As part of this change I also updated button's `layer` method to
`elevation`, since it takes an elevation. This method still has the
following issue:
You want to use `Button::elevation` when it's default colors are
invisible on the layer you are rendering the button on. However, current
this method uses the elevation's `bg` color, rather than it's
`on_elevation_bg`.
Ideally when you use `Button::elevation` you want to pass the elevation
you are _on_, not choosing one that will show up the elevation you are
on.
This change will be in a separate PR, as it likely will have widespread
visual impact across the app.
Release Notes:
- N/A
Closes#10167
This is take 2 on https://github.com/zed-industries/zed/pull/2341 which
was closed due to lack of migrator.
This PR contains rename of following keymap actions:
```sh
1. ["editor::GoToPrevHunk", { "center_cursor": true }] -> ["editor::GoToPreviousHunk", { "center_cursor": true }]
2. "editor::GoToPrevDiagnostic" -> "editor::GoToPreviousDiagnostic"
3. "editor::ContextMenuPrev" -> "editor::ContextMenuPrevious"
4. "search::SelectPrevMatch" -> "search::SelectPreviousMatch"
5. "file_finder::SelectPrev" -> "file_finder::SelectPrevious"
6. "menu::SelectPrev" -> "menu::SelectPrevious"
7. "editor::TabPrev" -> "editor::Backtab"
```
Release Notes:
- Renamed several keymap actions for consistency (e.g., `GoToPrevHunk` →
`GoToPreviousHunk`, `TabPrev` → `Backtab`). Your existing configured
keybindings will still work. You can click **"Backup and Update"** at
the top of your keymap file to easily update to the new actions.
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
Closes https://github.com/zed-industries/zed/issues/25413
As the issue points out well, themes do not need to alter any in-memory
state on load: that is done via settings file load.
Originally, it was introduced in
https://github.com/zed-industries/zed/pull/4064 and
https://github.com/zed-industries/zed/pull/24857 had restored that
behavior, which seems wrong to do.
Apart from removing that part, removes unnecessary methods and
emphasizes that in-memory state is the Buffer/UI size — no need to add
`Adjusted` there as the settings file presence is already enough.
Release Notes:
- Fixed theme selector resetting the buffer size
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
This Pull Request tackles the issue outline in #14287 by changing the
way `KeyBinding`s for vim mode are displayed in the command palette.
It's worth pointing out that this whole thing was pretty much
implemented by Conrad Irwin during a pairing session, I just tried to
clean up some other changes introduced for a different issue, while
improving some comments.
Here's a quick list of the changes introduced:
- Update `KeyBinding` with a new `vim_mode` field to determine whether
the keybinding should be displayed in vim mode.
- Update the way `KeyBinding` is rendered, so as to detect if the
keybinding is for vim mode, if it is, only display keys in uppercase if
they require the shift key.
- Introduce a new global state – `VimStyle(bool)` - use to determine
whether `vim_mode` should be enabled or disabled when creating a new
`KeyBinding` struct. This global state is automatically set by the `vim`
crate whenever vim mode is enabled or disabled.
- Since the app's context is now required when building a `KeyBinding` ,
update a lot of callers to correctly pass this context.
And before and after screenshots, for comparison:
| before | after |
|--------|-------|
| <img width="1050" alt="SCR-20250205-tyeq"
src="https://github.com/user-attachments/assets/e577206d-2a3d-4e06-a96f-a98899cc15c0"
/> | <img width="1050" alt="SCR-20250205-tylh"
src="https://github.com/user-attachments/assets/ebbf70a9-e838-4d32-aee5-0ffde94d65fb"
/> |
Closes#14287
Release Notes:
- Fix rendering of vim commands to preserve case sensitivity
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes https://github.com/zed-industries/zed/issues/23505
Now `zed::IncreaseBufferFontSize` (and all the same UI- and
Buffer-related settings) action is parameterized with `{ "persist": true
}` (default).
Using `"persist": false` brings back resizing behavior prior to
https://github.com/zed-industries/zed/pull/23265
Release Notes:
- Added a way to toggle font size without settings adjustments
Closes https://github.com/zed-industries/zed/issues/23894
Reworks all trigger declarations from
`.trigger(element.tooltip(tooltip))` into
`.trigger_with_tooltip(element, tooltip)` , with new API disallowing
simultaneous trigger and tooltip display.
All existing `.trigger(` calls were replaced, except 2 not applicable
(in dock.rs and pane.rs), 15 left as ones without tooltips, and 2
unchanged places in `inline_completion_button.rs`, where
0f7bb2e9fd/crates/inline_completion_button/src/inline_completion_button.rs (L311-L319)
`with_animation` does not allow us to simply use the same approach.
Release Notes:
- Fixed hover tooltips appearing after related element is pressed
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
## Context
While looking through the client crate, I noticed that some of the old
functions and variables were still using gpui::model name that was
deprecated during the gpui3 transition. This PR renames those instances
of model to entity to be more inline with gpui3.
In addition, I also renamed `model` to `entity` in cases found by the
below search terms given by @someone13574
- model = cx.
- model: Entity
- model: &Entity
- OpenedModelHandle
- model.update
- model.upgrade
- model = .*\.root (regex)
- parent_model
- model = cx.new
- cx.spawn(move |model
Release Notes:
- N/A
I believe this takes care of the remaining events running through the
old flow that requires transformation at the collab server level. I
think all events are now going through `telemetry::event!()`.
For anyone curious where the new telemetry names are coming from, you
can check the `for_snowflake` function within
`crates/collab/src/api/events.rs`, to see how collab is currently
transforming the events going through the old flow.
Release Notes:
- N/A
Fix a bug where a GPUI macro still used `ModelContext`
Rename `AsyncAppContext` -> `AsyncApp`
Rename update_model, read_model, insert_model, and reserve_model to
update_entity, read_entity, insert_entity, and reserve_entity
Release Notes:
- N/A
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
Now we ensure that task output is fully drained and printed to Zed
terminal pane on task completion.
This change depends on a recent change to alacritty_terminal crate:
5e78d20c70.
Closes https://github.com/zed-industries/zed/issues/18342
Release Notes:
- Fixed missing task terminal output on Linux for short-running commands
Motivation for this is using markdown for keymap error notifications in
#23113, but it also benefits the copied text of repl tables.
Release Notes:
- N/A
This PR adds the initial concept of an `IconTheme` and refactors
`FileIcons` to use it to resolve the icons.
The `IconTheme` will ultimately be used to allow users to select a
different set of icons to use. Currently, however, this is just laying
the foundation for that work.
The association between file types and icons is now handled by the icon
theme when we resolve file icons. This mapping has been moved out of
`file_types.json` and into `icon_theme.rs`.
Release Notes:
- N/A
- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
- Adds the Switch component
- Updates `Selected`, `Selectable` -> `ToggleState`, `Toggleable`
- Adds `checkbox` and `switch` functions to align better with other
elements in our layout system.
We decided not to merge Switch and Checkbox. However, in a followup I'll
introduce a Toggle or AnyToggle enum so we can update
`CheckboxWithLabel` -> `ToggleWithLabel` as this component will work
exactly the same with either a Checkbox or a Switch.
Release Notes:
- N/A
Some VPN configurations require that websockets present a user agent.
This adds it in directly for the repl usage. I wish there was a way to
reuse the user agent from the `cx.http_client`, but I'm not seeing a
simple way to do that for the moment since it's not on the `HttpClient`
trait.
No release notes since this feature hasn't been announced/exposed.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/12029
Allows to introspect project items inside items more deeply, checking
them for being dirty.
For that:
* renames `project::Item` into `project::ProjectItem`
* adds an `is_dirty(&self) -> bool` method to the renamed trait
* changes the closing logic to only care about dirty project items when
checking for save prompts conditions
* save prompts are raised only if the item is singleton without a
project path; or if the item has dirty project items that are not open
elsewhere
Release Notes:
- Fixed item closing overly triggering save dialogues
Closes https://github.com/zed-industries/zed/issues/13246
Supersedes: https://github.com/zed-industries/zed/pull/16192
I couldn't push to the git fork this user was using, so here's the exact
same PR but with some style nits implemented.
Release Notes:
- Added image rendering to the Markdown preview
---------
Co-authored-by: dovakin0007 <dovakin0007@gmail.com>
Co-authored-by: dovakin0007 <73059450+dovakin0007@users.noreply.github.com>
This PR introduces a unified interface for both native and remote
kernels through the `RunningKernel` trait. When either the native kernel
or the remote kernels are started, they return a `Box<dyn
RunningKernel>` to make it easier to work with the session. As a bonus
of this refactor, I've dropped some of the mpsc channels to instead opt
for passing messages directly to `session.route(message)`. There was a
lot of simplification of `Session` by moving responsibilities to
`NativeRunningKernel`.
No release notes yet until this is finalized.
* [x] Detect remote kernelspecs from configured remote servers
* [x] Launch kernel on demand
For now, this allows you to set env vars `JUPYTER_SERVER` and
`JUPYTER_TOKEN` to access a remote server. `JUPYTER_SERVER` should be a
base path like `http://localhost:8888` or
`https://notebooks.gesis.org/binder/jupyter/user/rubydata-binder-w6igpy4l/`
Release Notes:
- N/A
Starts setting up a `RunningKernel` trait to make the remote kernel
implementation easy to get started with. No release notes until this is
all hooked up.
Release Notes:
- N/A
Just block mouse down events, and in the case of the inline assist
prompt, set the default cursor.
Release Notes:
- N/A
Co-authored-by: Richard <richard@zed.dev>
The R kernel doesn't use base64 padding whereas the Python kernel (via
matplotlib) sometimes uses padding. We have to use the `base64` crate's
`Indifferent` mode.
/cherry-pick v0.161.x
Release Notes:
- N/A
This upgrades `nbformat` and `runtimelib` to handle jupyter types with
even more validation and flexiblity. This also processes any multiline
string data coming from the kernel, including with image data (like
`image/png`). While I was at it I also fixed a longstanding issue around
images by eliminating all whitespace (something `atob` does) and using
the no pad decoder.
Fixes: #17956
Before:
<img width="741" alt="image"
src="https://github.com/user-attachments/assets/37ec2cae-ce78-4475-aaa3-4d785e4015d0">
After:
<img width="727" alt="image"
src="https://github.com/user-attachments/assets/e2431ba2-048b-4205-9898-54f357795a9c">
Release Notes:
- Fixed issue with image output from REPL kernels that didn't use base64
padding
Density tracking issue: #18078
This PR refactors our spacing system to use a more flexible and
maintainable approach. We've replaced the static `Spacing` enum with a
dynamically generated `DynamicSpacing` enum using a proc macro.
Enum variants now use a `BaseXX` format, where XX = the pixel value @
default rem size and the default UI density.
For example:
`CustomSpacing::Base16` would return 16px at the default UI scale &
density.
I'd love to find another name other than `Base` that is clear (to avoid
base_10, etc confusion), let me know if you have any ideas!
Changes:
- Introduced a new `derive_dynamic_spacing` proc macro to generate the
`DynamicSpacing` enum
- Updated all usages of `Spacing` to use the new `DynamicSpacing`
- Removed the `custom_spacing` function, mapping previous usages to
appropriate `DynamicSpacing` variants
- Improved documentation and type safety for spacing values
New usage example:
```rust
.child(
div()
.flex()
.flex_none()
.m(DynamicSpacing::Base04.px(cx))
.size(DynamicSpacing::Base16.rems(cx))
.children(icon),
)
```
vs old usage example:
```
.child(
div()
.flex()
.flex_none()
.m(Spacing::Small.px(cx))
.size(custom_spacing(px(16.)))
.children(icon),
)
```
Release Notes:
- N/A
Makes repl actions that are specific to running kernels only come up
after a session has been started at least once for the editor.
Release Notes:
- Only show session oriented `repl::` actions for editors after a
session has been created
Closes#18341
* [x] Remove "Change Kernel" Doc link from REPL menu
* [x] Remove chevron
* [x] Set a higher min width
* [x] Include the language along with the kernel name
Future PRs will address
* Add support for Python envs (#18291, #16757, #15563)
* Add support for Remote kernels
* Project settings support (#16898)
Release Notes:
- Added kernel picker for repl
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
* Implement `clone_on_split` to allow splitting a notebook into another
pane
* Switched to `tab_content` in `impl Item for NotebookEditor` to show
both the notebook name and an icon
* Added placeholder methods and TODOs for future work, such as saving,
reloading, and search functionality within the notebook editor.
* Started moving more core `Model` bits into `NotebookItem`, including
pulling the language of the notebook (which affects every code cell)
* Loaded notebook asynchronously using `fs`
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This is a behavior-preserving change, but lays the groundwork for
expanding selections when the cursor lands inside of a "replace" block.
Release Notes:
- N/A
This is the start of a notebook UI for Zed.
`🔔 Note: This won't be useable yet when it is merged! Read below. 🔔`
This is going to be behind a feature flag so that we can merge this
initial PR and then make follow up PRs. Release notes will be produced
in a future PR.
Minimum checklist for merging this:
* [x] All functionality behind the `notebooks` feature flag (with env
var opt out)
* [x] Open notebook files in the workspace
* [x] Remove the "Open Notebook" button from title bar
* [x] Incorporate text style refinements for cell editors
* [x] Rely on `nbformat` crate for parsing the notebook into our
in-memory format
* [x] Move notebook to a `gpui::List`
* [x] Hook up output rendering
Release Notes:
- N/A
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This PR adds the ability for editor blocks to replace lines of text, but
does not yet use that feature anywhere. We'll update assistant patches
to use replace blocks on another branch:
https://github.com/zed-industries/zed/tree/assistant-patch-replace-blocks
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Richard Feldman <richard@zed.dev>
Co-authored-by: Marshall Bowers <marshall@zed.dev>
Co-authored-by: Nathan Sobo <nathan@zed.dev>
This simplifies rendering of excerpt headers and footers, and removes
the need to store a `BlockDisposition` on these boundary blocks. It's a
step toward implementing "replace blocks", which we want to use in the
assistant panel.
We've also cleaned up the way heights are specified for headers and
footers and fixed some visual asymmetries between the "expand upward"
and "expand downward" buttons.
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
Fixes https://github.com/zed-industries/zed/issues/5291
Release Notes:
- Fixed a bug where the 'toggle comments' command didn't use the right
comment syntax in JSX and TSX elements.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
- Implement restart kernel functionality
- Clean up shutdown process to properly drop messaging and exit status
tasks
- Refactor kernel state handling for better consistency
Closes#16037
Release Notes:
- repl: Added restart kernel action
- repl: Fixed issue with shutting down kernels that are in a failure
state
This PR is a small refactor to remove the leading `_` for some free
variables, as this unintentionally marks them as unused to the compiler.
While the fields on the struct _are_ unused, the free variables should
participate in usage tracking, as we want to make sure they get stored
on the struct.
Release Notes:
- N/A
For future reference: WIP branch of copy/pasting a mixture of images and
text: https://github.com/zed-industries/zed/tree/copy-paste-images -
we'll come back to that one after landing this one.
Release Notes:
- You can now paste images into the Assistant Panel to include them as
context. Currently works only on Mac, and with Anthropic models. Future
support is planned for more models, operating systems, and image
clipboard operations.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Jason <jason@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Fixes#15923
Release Notes:
- Assistant workflow steps can now be applied and reverted directly from
within the assistant panel.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Antonio <antonio@zed.dev>
<img width="862" alt="image"
src="https://github.com/user-attachments/assets/ae8c479d-d9f9-4c46-bb1a-be411ab07876">
Release Notes:
- Added additional context about available to kernel sessions
- Fixed bug in kernelspec launch choosing first available kernel
matching the language rather than selected name
---------
Co-authored-by: Jason <jason@zed.dev>
Release Notes:
- Added `ctrl-alt-enter` keybinding for `repl::RunInPlace`
(`ctrl-option-enter` on MacOS). Keeps your screen position and cursor in
place when running any block.
